Grinders Wet
Listings page for the selected category, need assistance? Call our advisors now...
+44 (0)1977 661 095 or Click here to ask us for additional information.
Browse our used process plant listings by sub category:
Products in Grinders Wet 91 Items
N10855-12
David Bridge Twin Roll Mill 150mm x 310mm
Mild Steel Twin Roll Mill 150mm dia x 310mm face with cored rolls for heating and cooling with approx 4 kW geared drive.
Overall size 1,750mm x 1,460mm x 19,00mm tall
Item Ref: N10855-12
N10736-12
David Bridge M/S Twin Roll Mill 150mm x 310mm
Mild Steel Twin Roll Mill 150mm dia x 310mm face with cored rolls for heating or cooling friction ratio 1 to 1 and 1 to 1.25 with 5.5 Kw geared drive motor No: 63/w/352A overall Size 1400mm x 1600mm x 1700mm tall
Item Ref: N10736-12
S5788A-10
New Lab/Pilot 2 To 5L Pot Roller
0.25 Kw Gear Driven Rollers Rubber Covered,Suitable For 2 To 5 L Pots. Gear Driven Shaft With 2 Adjustable Rollers To Suit Drum,Free Shaft Adjustable Sideways ,Floor Standing, 130 mm Long, 690 mm Wide [ Variable Speed Available At Extra Cost.]
Item Ref: S5788A-10
N9587-25
Twin Roll Shaw Mixing Mill
Roll Diam 150mm X 330mm Face. Cored Rolls For Steam Or Oil. Manual Roll Adjustment With Safety Switch And Grid. Overall Size 1600mm X 1300mm X 1150mm Tall. With 5.5Kw Geared Drive.
Item Ref: N9587-25
ND-13667-12
45L Vertical S/S Macerator Grinder 1.5 kw
Stainless Steel
Vertical Macerator Grinder with 45L feed hopper 400 mm dia x 370 mm
deep to a 220 mm dia General purpose stator with 16 mm dia holes with
under driven 1.5 kw 1440 rpm drive with 25 mm dia inlet, or 38 mm dia
outlet with 975 mm feed height. Overall size 350 mm x 950 mm x 975 mm
high.
Item Ref: ND-13667-12
ND-14144-12
WAB Horizontal Bead Mill Research Lab Mill
Stainless Steel Horizontal Mill.
Item Ref: ND-14144-12
N9036-12
Holmes M/S Single Roll Mill 660Mm Face
Mild Steel Roll 300mm Dia 660mm Face Water Cooled Roll Knife Discharge. 7.5Kw 165 Rpm Belt Drive Overall Size 1600mm X 1100mm X 1250mm Tall.
Item Ref: N9036-12
ND-13917-12
Microtron S/S JKTD Vertical Bead Mill Type M0.5 3.7kW
Stainless steel Jacketed Bead basket with 0.1mm to 1.00 mm YTZ bead charge 1.5 to 2.2 L Bead Loading flow rates of 240 to 330 mls with D2 Tool Steel Hardened Agitator with Tungsten Carbide Pegs. Viton Seals. Product flow rate 2 to 20 LPM Peristaltic feed pump with HMI Inverter controls.
Overall size 500 mm x 450 mm x 750 mm weight 200 kg
Item Ref: ND-13917-12
N8771-50
Ultrasonic Disintegrator Sonicator W385
475W 20 Hz Output (Note Output Lance Is Missing)
Item Ref: N8771-50
N5933-12
Steel Grinding Balls 6 Mm Diam 1323 K
Batch Price Quoted Below Or O2/Kilo
Item Ref: N5933-12
N8086-12
15 Lpm Ultrasonic Mono Sh32 S/S
Stainless Steel Mono 15 Lpm At 30 M Head With 38mm Inlet 50 mm Outlet With Ultrasonic Adaption 2.2 Kw 720 Rpm Direct Coupled Drive
Item Ref: N8086-12
S6565-12
Ultrasonic Rapisonic Homogeniser 1.5 Kw
Stainless Steel Unit With 20 mm Connections And 1.5 Kw Drive Running At 960 Rpm
Item Ref: S6565-12