Special one of items

CM37FP-63
Rigal-Bennett Clamp-On Stirrer .37Kw Flp
Flameproof 3-Phase 1440 Rpm Unit With Ptfe Shaft And Propeller For Mixing Non- Viscous Liquids, Angle Adjustable, Length To Suit Tank. A Range Of Suitable Vessels Available.
Item Ref: CM37FP-63
Details
CM373P-63
Rigal-Bennett Clamp-On Stirrer .37Kw
Tecf 3-Phase 1440 Rpm Unit With Ptfe Shaft And Propeller For Mixing Non- Viscous Liquids, Angle Adjustable, Length To Suit Tank. A Range Of Suitable Vessels Available.
Item Ref: CM373P-63
Details
EV11T-63
Rigal Bennett Shearhead Mixer 1.1/0.55Kw
Standard 3-Phase Two Speed Motor 1.1/0.55Kw 2880/1440 Rpm Drive Mounted In Stainless Steel Bell Housing With Stainless Steel Liquid Flushing Mechanical Seal Suitable For Working At Full Vacuum Or General Purpose Shearhead 50 mm Dia With Stainless Steel Shaft Length Aprox 650mm. Mounting By Flange To Suit Existing Bridge.
Item Ref: EV11T-63
Details
GP550/PSR
R-B Disc Turbine Paddle Stirrer 5.5Kw
Tefc Gear Drive 140 Rpm. Length Of Stainless Steel Shaft To Suit Above Vessel. Fitted With 1 Off Disc Turbine Paddle With Swept Dia Of 60mm. Fitted With Approx. 8 Off Vertical Flat Disc Paddles. Exact Detail As Per Cad Drg.
Item Ref: GP550/PSR
Details
GP750/PSR
R-B Disc Turbine Paddle Stirrer 7.5Kw
Tefc Gear Drive. 140 Rpm. Length Of S/S Shaft To Suit Above Vessel. Fitted With 1 Off Disc Turbine Paddle With Swept Dia. Of 600mm Fitted With Approx 8 Off Vertical Flat Disc Plates. Exact Detail To Be Confirmed As Per Cad Drg.
Item Ref: GP750/PSR
Details
EV75F-63
R&B Shearhead Mixer V/Speed 7.5Kw, Flp
Flameproof 3 Phase Mechanical Varriable Speed Geardrive 7.5Kw 415 To 3100 Rpm With General Purpose Shearhead 130 mm Dia Stainless Steel Contact Parts. Mounting By Flange . Standard Shaft Length Is 750mm But Other Lengths Can Be Specified.
Item Ref: EV75F-63
Details
GP82/62/PSR
R-B Two Speed Paddle Stirrer 8.2/6.2 Kw
Tefc Gear Drive 183/91 Rpm. Two Speed Geardrive. Length Of S/S Shaft To Suit Vessel With 3 Off 3-Bladed Angle Paddles With Swept Dia Of 600mm. Mounted In Mild Steel Bellhousing. Includes Steady Bearing. Flange Mounted To Suit Vessel Quoted Above.
Item Ref: GP82/62/PSR
Details
GP82/62F/PSR
R-B Two Speed Paddle Stirrer 8.2/6.2 Kw
Exd Tefc Gear Drive 183/91 Rpm. Two Speed Gear Drive. Length Of Stainless Steel Shaft To Suit Vessel With 2 Off 3-Bladed Angle Paddles With Swept Dia Of 600mm. Includes Mild Steel Bell Housing With Bearings And Vapour Seal.
Item Ref: GP82/62F/PSR
Details
GPR220-63
Rigal-Bennett Rld Paddle Stirrer 22 Kw
Tefc Geared Drive, 40 Rpm. 4100mm Length Of Stainless Steel Shaft To Suit Tank With 1800mm Dia Three Bladed Stainless Steel Paddles With Rubber Lining. Unit Mounted On Mild Steel Bell Housing Suitable For Flange Mounting.
Item Ref: GPR220-63
Details
TH30/15F/PSR
R-B 2 Speed Sawtooth Mixer 30/15Kw Exd
New Dispersion Mixer 1440/710 Rpm 300mm Dia Disc Mixing Head With Serrated Edge All Stainless Steel 316 Grade. Mounted In Mild Steel Bell Housing With Steady Bearings And Vapour Seal. Flange Mounted To Suit Vessel Quoted Above.
Item Ref: TH30/15F/PSR
Details
TH30/15F/PSR
R-B Two Speed Sawtooth Mixer 30/15Kw Exd
New Dispersion Mixer With 1440/710 Rpm Drive. 300mm Dia Disc Mixing Head With Serrated Edge Suitable For Mounting In Vessel Quoted Above. All S/S 316 Grade Contact Parts Including Mild Steel Bellhousing With Steady Bearings And Vapour Seal.
Item Ref: TH30/15F/PSR
Details
TH373/PSR
Rigal Bennett Sawtooth Mixer 37Kw
New Dispersion Mixer With 1440 Rpm Drive. 300mm Dia Disc Head With Serrated Edge Suitable For Mounting Vessel Quoted Above. All Stainless Steel 316 Grade Contact Parts. Includes Steady Bearing System Mounted In Bell Housing.
Item Ref: TH373/PSR
Details
GP450V-63
Rigal-Bennett Paddle Stirrer 45 Kw
New 3 Phase Tefc Geared Drive 380-400V 41 To 65.5Hz Range To Give 50 To 80 Rpm. Length Of Stainless Steel Shaft To Suit Tank Aprox 5200mm Long With Two Off Four Blade 1,800mm Swept Dia Stainless Steel Paddles. Unit Suitable For Flange Mounting To The Dn700 Top Centre Flange On Existing Vessel. Fitted With Vacuum Rated Packed Gland Or Mechanical Seal Assembly Mounted Within Bell Housing. Supplied With Control Pannel To Suit With Frequencey Inverter Control To Give Speed Change As Required. All Stainless Steel Contact Parts To Be 316 Grade.
Item Ref: GP450V-63
Details
GP056SP-63
Rigal-Bennett Paddle Stirrer 55 Kw
New 3 Phase Tefc Geared Drive 80Rpm. Length Of Stainless Steel Shaft To Suit Tank Aprox 5200mm Long With Four Off Four Blade About 1,800mm Swept Dia Stainless Steel Paddles. Unit Suitable For Flange Mounting To The Top Centre Flange On Existing Vessel. Fitted With Vacuum Rated Packed Gland Assembly Mounted Within Bell Housing. All Stainless Steel Contact Parts To Be 316 Grade.
Item Ref: GP056SP-63
Details
TMHVAC553-63
R-B Highspeed Vac Sawtooth Mixer 55Kw
New Sawtooth Dispersion Mixer Intended For Mobile Containers With Up To 1200mm Dia With Max Lift 1400mm With Hydraulic Raise Lower Stand. With Control Panel To Be Mounted On Or Near To Raise Lower Column. New Vacuum Dispersion Mixer To Be Supplied With 55Kw Motor With 500mm/450mm Double Deck Sawtooth Dispersion Blade With Frequency Inverter Control To Give Speed Range Of 0-1200 Rpm. Supplied With Stainless Steel Vacuum Lid Mounted On Hydraulic Raise/Lower Mechanism. Designed To Give Operator Float Adjustment Of Sawtooth Dispersion Head Of Approx. 3-400mm. To Be Supplied With Inspection Hatch/Product Charge Point With Removable Safety Grid For Cleaning. Designed To Give Maximum Access In Space Available. Portable Bowls To Be Located By Clamping Device Designed To Centrally Locate Bowls To Suit Vacuum Lid And Designed To Prevent Bowls From Moving When Lid Is Removed. If Raise/Lower Mechanism Attempts To Lift Lid Whilst Bowl Is Under-Vacuum, A Safety System Will Be In Place To Prevent This From Occurring. Mixer To Be Supplied With Temperature Probe To Monitor Product Temperature, A Tachospeedometer To Give Mechanical Indication Of Speed, Power Transmission From Electric Motor Is Via V-Belt Pulleys Through To Main Mixer Shaft. Standard Electrics Supplied 3 Ph. 415V 50 Hz. Sawtooth Dispersion Head Designed For Easy Clean And Changing. Impellor Blade Grade 316 S/S. Control Panel Will Be Mounted With Remote Control Console Mounted On Hydraulic Rasie/Lower Stand With A Requirement For The Inverter And Starting Equipment To Be Mounted In A Larger Control Panel In Your Control Room Area. Unit Supplied With Safety Limit Switches In Accordance With Health And Safety Requirements. Unit To Be Supplied With 1.1Kw 40M.Cu Per Hour Vacuum Pump And In Line Filter. Vacuum Gauge Indication.
Item Ref: TMHVAC553-63
Details
KM100VAC-63
500 L S/S Vac Jktd Contra Rotating Mixer
500 L S/S Vac Jktd Contra Rotating Mixer Description: Inner Chamber Stainless Steel 316 Grade Gmp Mirror Finish 8 mm Thick Sides Dish 10mm Duty Full Vacuum / 2.2 Bar Working Pressure At 165 Deg.C Test Pressure 6 Bar. Internal Chamber Size 930 mm Dia X 1100mm Deep Dish Top And Bottom Each 200mm Deep. Outer Stainless Steel Steam Jacket With Inner Spiral To Assist Steam Flow 304 Grade 8 mm Thick Sides Dish 10mm Duty Full Vacuum / 2.2 Bar Working Pressure At 165 Deg.C. Test Pressure 6 Bar. With Connections To Suit Steam In And Out Water In And Out And Drain Safety Valve, Pressure Indication Gauge. Outside Fitted With Rockwool Insulation And 1.6mm 304 Grade Stainless Steel Outer Cladding. Digital Temperature Controller Provided For On-Off Operation For The Steam Valve For Temperature Controlling. Chamber Base With Central 75mm Dia Triclover Flush Fitting Bottom Air Operated Rising Stem Valve. And 3 Off 32mm Dia Triclover Base Product Connections With Air Operated Ball Valves , 2 Off 25mm Dia Triclover Connections One To Be Used As Sample Port Other As Temperature Probe Port. Dish Top Lid 316 Grade Gmp Mirror Finish Stainless Steel Swing Bolts With Lid White Rubber "O" Ring Type Seal For Easy Access. Mounted With Hydraulic Raise Lower Stand To Lift Stirrer Out Of The Process Chamber. Lid With 220mm Dia Inspection Port And Sight Glass And Safety Grid, 1 Off 75mm Dia Triclover Inlet Connection 3 Off Product 50mm Dia Triclover Inlets Connections, 2 Off 25mm Dia Triclover Connections With 360 Deg Cip Spray Balls. 2 Off 25mm Dia Triclover Connections 1 Off For Pressure Relief Gauge Other For Pressure Releife Safety Vent. Fitted With 11 Kw 5 To 50 Rpm 3 Ph 415V / Tefc / 50 Hz Ac. Center Mounted Contra Rotational Stirrer With Outer Tubular Stainless Steel Type Anchor With Ptfe Hinged Scrapers. Inner Contra Angular Paddle With 11Kw 5 To 85 Rpm 3 Ph 415V / Tefc / 50 Hz Ac. Bottom Entry Off Center Removable Shearhead Mixer 7.5 Kw 2880 Rpm Standard 3 Ph 415V / Tefc / 50 Hz Ac Fitted With Slotted Head All Parts 316 Grade Stainless Steel. Supplied With Stainless Steel Control Cabinet With Plc Touch Screen Control. 1 With Safety Circuit To Suit Working Environment. To Prevent Use When Lid Is Not Located In The Down Position. Emergency Stops As Required. 2 Each Top Entry Stirrer Motor With Start-Stop Frequency Inverter Variable Speed Control And Display. With Reversable Option. 3 Bottom Entry Stirrer Motor With Start-Stop Frequency Inverter Variable Speed Control And Display. 4 Start- Stop To Raise Lower The Lid. 5 Start- Stop For The Vacuum Pump. 6 Start- Stop For The Transfer Pump
Item Ref: KM100VAC-63
Details
KM450VAC-63
1000L S/S Vac Jktd Contra Rotating Mixer
1000 L S/S Vac Jktd Contra Rotating Mixer Description: Inner Chamber Stainless Steel 316 Grade Gmp Mirror Finish 8 mm Thick Sides Dish 10mm Duty Full Vacuum / 2.2 Bar Working Pressure At 165 Deg.C Test Pressure 6 Bar. Internal Chamber Size 1220 mm Dia X 1100mm Deep Dish Top And Bottom Each 200mm Deep. Outer Stainless Steel Steam Jacket With Inner Spiral To Assist Steam Flow 304 Grade 8 mm Thick Sides Dish 10mm Duty Full Vacuum / 2.2 Bar Working Pressure At 165 Deg.C. Test Pressure 6 Bar. With Connections To Suit Steam In And Out Water In And Out And Drain Safety Valve, Pressure Indication Gauge. Outside Fitted With Rockwool Insulation And 1.6mm 304 Grade Stainless Steel Outer Cladding. Digital Temperature Controller Provided For On-Off Operation For The Steam Valve For Temperature Controlling. Chamber Base With Central 75mm Dia Triclover Flush Fitting Bottom Air Operated Rising Stem Valve. And 3 Off 32mm Dia Triclover Base Product Connections With Air Operated Ball Valves , 2 Off 25mm Dia Triclover Connections One To Be Used As Sample Port Other As Temperature Probe Port. Dish Top Lid 316 Grade Gmp Mirror Finish Stainless Steel Swing Bolts With Lid White Rubber "O" Ring Type Seal For Easy Access. Mounted With Hydraulic Raise Lower Stand To Lift Stirrer Out Of The Process Chamber. Lid With 220mm Dia Inspection Port And Sight Glass And Safety Grid, 1 Off 75mm Dia Triclover Inlet Connection 3 Off Product 50mm Dia Triclover Inlets Connections, 2 Off 25mm Dia Triclover Connections With 360 Deg Cip Spray Balls. 2 Off 25mm Dia Triclover Connections 1 Off For Pressure Relief Gauge Other For Pressure Releife Safety Vent. Fitted With 15 Kw 5 To 50 Rpm 3 Ph 415V / Tefc / 50 Hz Ac. Center Mounted Contra Rotational Stirrer With Outer Tubular Stainless Steel Type Anchor With Ptfe Hinged Scrapers. Inner Contra Angular Paddle With 11Kw 5 To 85 Rpm 3 Ph 415V / Tefc / 50 Hz Ac. Bottom Entry Off Center Removable Shearhead Mixer 7.5 Kw 2880 Rpm Standard 3 Ph 415V / Tefc / 50 Hz Ac Fitted With Slotted Head All Parts 316 Grade Stainless Steel. Supplied With Stainless Steel Control Cabinet With Plc Touch Screen Control. 1 With Safety Circuit To Suit Working Environment. To Prevent Use When Lid Is Not Located In The Down Position. Emergency Stops As Required. 2 Each Top Entry Stirrer Motor With Start-Stop Frequency Inverter Variable Speed Control And Display. With Reversable Option. 3 Bottom Entry Stirrer Motor With Start-Stop Frequency Inverter Variable Speed Control And Display. 4 Start- Stop To Raise Lower The Lid. 5 Start- Stop For The Vacuum Pump. 6 Start- Stop For The Transfer Pump
Item Ref: KM450VAC-63
Details