2,500L Greaves Combination Sawtooth Mixer

Used 2,500 litre Greaves combination mixer suitable for applications requiring both low-speed anchor agitation and high-speed sawtooth dispersion.

Mixing Chamber:
Stainless steel chamber with mild steel jacketed bowl, approximately 1,500mm diameter x 1,500mm deep, incorporating a 300mm deep conical bottom leading to a 100mm diameter outlet.

Anchor Stirrer:
Top-mounted 11 kW, 28 rpm FLP Exd IIB T5-rated motor driving a scraped anchor paddle stirrer.

Sawtooth Disperser:
Top-mounted hydraulic raise/lower sawtooth dispersion mixer with 20/4 kW, 1,460/735 rpm FLP Exd IIB T4-rated motor.

The combination of the scraped anchor and high-speed sawtooth disperser makes this mixer suitable for processing products requiring both bulk circulation and high-shear dispersion.

Construction:

• Stainless steel mixing chamber
• Mild steel jacketed bowl
• Mild steel supporting frame
• Top-mounted hydraulic raise/lower system
• FLP/Exd hazardous-area rated motors
• Previously fitted with approximately 1,200mm-high extensions to accommodate an elevated discharge arrangement

Overall Dimensions:
Approximately 2,600mm long x 1,600mm wide x 3,000mm high

Control Panel:
Control panel available at additional cost.

Typical Applications:
Suitable for a range of chemical, paint, coating, ink, adhesive, resin, cosmetic and other viscous-product applications where both anchor mixing and high-speed dispersion are required.