Tank Mounted Dispersion Dissolver Mixers

Description:
Used 7,500 litre stainless steel jacketed mixing vessel, vacuum rated, manufactured by NETZSCH, model PMD-VC 7500 (Mastermix type).

The vessel is approximately 2,100 mm internal diameter × 3,150 mm straight side depth and is fitted with:

• Base-mounted slow speed anchor stirrer – 15 kW

• Top-mounted high speed cavitation disperser – 75 kW

• Hydraulic raise/lower system – 2.2 kW hydraulic power pack

Designed for high-viscosity and vacuum processing applications, typically used in coatings, adhesives, sealants, inks and similar products.

Location: United Kingdom
Available for inspection by appointment.

Note: Listing includes a manufacturer’s reference image for configuration purposes. The primary photographs show the actual unit currently available.

Key Specifications

• Manufacturer: NETZSCH

• Model: PMD-VC 7500 (Mastermix type)

• Nominal capacity: 7,500 litres

• Construction: Stainless steel

• Jacketed vessel

• Vacuum rated

Mixing System:

• Slow speed anchor agitator – 15 kW (base mounted)

• High speed disperser – 75 kW (top mounted)

• Hydraulic lift system – 2.2 kW power pack

Dimensions:

• Vessel size: approx. 2,100 mm dia × 3,150 mm deep

• Height to tank brim / lid flange: 4,170 mm

• Overall height (stirrer closed): 4,170 mm

• Overall height (stirrer open/lifted): 5,820 mm

• Maximum height with stirrer fully open: 7,800 mm

Used 5,000 litre stainless steel heavy-duty mixing system, manufactured by Turello, type TMR 7000/3, total installed power 190 kW.

The stainless steel mixing chamber is approximately 1,950 mm diameter × 1,950 mm deep, with dished top and bottom, and is fitted with:

• 1 × 30 kW central anchor scraper mixer

• 2 × 75 kW off-centre high-speed incorporator mixers

All mixing elements are hydraulically driven.

The stainless steel chamber is mounted within a mild steel support frame, approximately 3,000 mm × 3,000 mm × 5,000 mm high.

The unit is currently dismantled for storage and ease of transport.

Previously used for mixing cementitious grouts and high-viscosity construction adhesives (“No Nails” type products).

Location: United Kingdom
Available for inspection by appointment.

The mixer can be supplied in its current condition, or alternatively a quotation can be provided for reassembly, inspection, and servicing prior to delivery.

Key Specifications

• Manufacturer: Turello

• Model: TMR 7000/3

• Nominal capacity: 5,000 litres

• Total installed power: 190 kW

• Construction: Stainless steel chamber

• Drive system: Hydraulic

Mixing Configuration:

• Central anchor scraper agitator – 30 kW

• 2 × Off-centre incorporator mixers – 75 kW each

Vessel Dimensions:

• Chamber size: approx. 1,950 mm dia × 1,950 mm deep

• Dished top and bottom

Support Frame:

• Mild steel construction

• Approx. 3,000 mm × 3,000 mm footprint × 5,000 mm high

Product Description:

This 3,000L stainless steel jacketed combination mixer is designed for industrial applications, providing robust mixing capabilities. The chamber features a diameter of 1,600mm and a depth of 1,550mm, with a dish bottom leading to a 100mm diameter outlet. The unit is equipped with a mild steel steam jacket, enhancing its temperature control during processing. It includes four off-center mounted paddles and an off-center sawtooth dispersion disc for versatile mixing operations. The mixer is supported by a stainless steel bridge and lid, with hinged sections on both sides for easy access.

Technical Specifications:

• Capacity: 3,000 liters
• Material: Stainless Steel Chamber with Mild Steel Steam Jacket
• Dimensions:
  • Diameter: 1,600mm
  • Depth: 1,550mm
  • Bottom Shape: Dish bottom with a 100mm diameter outlet
• Mixing System:
  • Paddle Stirrer: 7.5 kW, 45 RPM, with four off-center mounted paddles
  • Sawtooth Dispersion Disc: 15 kW, 1,440 RPM, 200mm diameter, off-center mounted
• Jacket:
  • Material: Mild Steel Steam Jacket
  • Working Pressure: 4 Bar
• Additional Features:
  • Lid: Stainless Steel Bridge and Lid with Hinged Sections on Both Sides
• Manufacturer: Fag

Used 2,500 litre Greaves combination mixer suitable for applications requiring both low-speed anchor agitation and high-speed sawtooth dispersion.

Mixing Chamber:
Stainless steel chamber with mild steel jacketed bowl, approximately 1,500mm diameter x 1,500mm deep, incorporating a 300mm deep conical bottom leading to a 100mm diameter outlet.

Anchor Stirrer:
Top-mounted 11 kW, 28 rpm FLP Exd IIB T5-rated motor driving a scraped anchor paddle stirrer.

Sawtooth Disperser:
Top-mounted hydraulic raise/lower sawtooth dispersion mixer with 20/4 kW, 1,460/735 rpm FLP Exd IIB T4-rated motor.

The combination of the scraped anchor and high-speed sawtooth disperser makes this mixer suitable for processing products requiring both bulk circulation and high-shear dispersion.

Construction:

• Stainless steel mixing chamber
• Mild steel jacketed bowl
• Mild steel supporting frame
• Top-mounted hydraulic raise/lower system
• FLP/Exd hazardous-area rated motors
• Previously fitted with approximately 1,200mm-high extensions to accommodate an elevated discharge arrangement

Overall Dimensions:
Approximately 2,600mm long x 1,600mm wide x 3,000mm high

Control Panel:
Control panel available at additional cost.

Typical Applications:
Suitable for a range of chemical, paint, coating, ink, adhesive, resin, cosmetic and other viscous-product applications where both anchor mixing and high-speed dispersion are required.

Stainless steel Rigal Bennett Combination Mixer suitable for a wide range of mixing, dispersion, and homogenisation applications.

The 2,000 litre vessel measures approximately 1,320 mm diameter x 1,400 mm deep and features a 225 mm deep conical bottom tapering to a 100 mm diameter outlet for efficient discharge.

Fitted with a top-entry, bridge-mounted stainless steel anchor agitator, driven by a 4 kW geared motor at approx. 30 rpm. The anchor is equipped with PTFE hinged wall scrapers to ensure thorough mixing and improved heat transfer.

An off-centre high-speed sawtooth disperser, driven by a 7.5 kW motor at approx. 2,880 rpm, is mounted on a mild steel raise/lower frame, allowing accurate positioning of the disperser within the vessel.

The mixer is supplied on a mild steel working platform measuring approximately 2,200 mm x 1,600 mm, with a working height of 630 mm. Overall height approx. 3,550 mm.

Control panel available at extra cost.

Typical applications:
Starch, adhesives, coatings, polymers, resins, food and chemical products