New Agitator
Listings page for the selected category, need assistance? Call our advisors now...
+44 (0)1977 661 095 or Click here to ask us for additional information.
Browse our new process plant listings by sub category:
- Axial Tube Dissolver Stirrer
- Bottom entry Shearhead Stirrer
- Clamp On Geared Stirrer
- Clamp On Stirrer
- Combination Mixers
- Contra Rotating Scraped
- Dispersion Mixer
- Dispersion mixer raise/lower TMH range
- Drum/IBC Medium Viscosity Mixers
- Drum/IBC Mixers
- Geared Drum/IBC Mixers
- Inline Continuous Stirrer
- Lab Pilot - Combination Mixers
- Lab Pilot - Sawtooth Dispersion Mixers
- Lab Pilot - Shearhead Mixers
- Lab Pilot - Trifoil Mixers
- Lab Pilot - Turbine Mixers
- Liquiverter Mixer
- Medium speed Mixer
- Medium-Variable speed Mixer
- Scraped Surface Mixers
- Shear Head Stirrer
- Shearhead Duplex Stirrer
- Side & Bottom entry Stirrer
- Slow Speed Mixer
- Slow-Variable Speed Mixer
- Special one of items
- Variable Frequency Inverters
Products in New Agitator 464 Items
V150F-63
Rigal Bennett Paddle Stirrer 15 Kw Flp
Variable Gear Drive 80-350 Rpm. Length Of Stainless Steel Shaft To Suit Tank With 1 Off 900 mm Dia. 3 Bladed Stainless Steel Paddle. Unit Suitable For Flange Mounting.
Item Ref: V150F-63
G1100-63
Rigal-Bennett Paddle Stirrer 11 kW
Tefc Geared Drive, 30 Rpm. Length of Stainless Steel Shaft to Suit Tank with Two 1,000 mm Dia Stainless Steel Paddles. Unit suitable for Flange Mounting. Also available at 100 Rpm with Two 400 mm Dia Paddles. Additional Spec at Extra Cost
Item Ref: G1100-63
G110F-63
Rigal-Bennett Paddle Stirrer 11 kW Flp
Geared Drive, 30 Rpm. Length of Stainless Steel Shaft to Suit Tank with Two 900 mm Dia Stainless Steel Paddles. Unit suitable for Flange Mounting. Also available at 100 Rpm with Two 400 M Dia Paddles. Additional Spec at Extra Cost.
Item Ref: G110F-63
TMH11F-63
R-B Turbine/Sawtooth Mixer 11Kw Flp
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 800mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 300mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Or Outside Explosive Dangerous Area Where Applicable. With Power Pack.
Item Ref: TMH11F-63
TMH113-63
R-B Turbine/Sawtooth Mixer 11Kw
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 800mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 300mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Or Outside The Working Area Where Applicable. With Power Pack.
Item Ref: TMH113-63
TH113-63
Rigal-Bennett Saw Tooth Mixer 11 kW
New Dispersion Mixer with 2,880 Rpm Drive. 200mm Dia Disc Mixing Head with Serrated Edge Suitable for Mixing In Vessels 4/800mm Dia and Depth. All S/S Contact Parts. Unit Flange Mounted In Mild Steel Bell Housing
Item Ref: TH113-63
TV113-63
Rigal Bennett Saw Tooth Mixer 11 kW
New Dispersion Mixer with 11 kW 300 to 1,400 Rpm Variable Speed Motor Drive. Stainless Steel Shaft and 200 M/M Dia Disc Mixing Head with Serrated Edge. Flange Mounted In Housing. With Frequency Inverter Speed Control to Give Speeds up to 3,600 Rpm.
Item Ref: TV113-63
TV11F-63
Rigal Bennett Saw Tooth Mixer 11 kW Flp
New Dispersion Mixer with Variable Speed 630/2880 Rpm Drive. 200mm Disc Mixing Head with Serrated Edge Suitable for Mixing 4/800mm Dia & Depth. All Stainless Steel Contact Parts. Unit Flange Mounted In Mild Steel Bell Housing
Item Ref: TV11F-63
TH11F-63
Rigal-Bennett Saw Tooth Mixer 11 kW, Flp
New Dispersion Mixer with 2,880 Rpm Flameproof Drive. 200mm Dia Disc Mixing Head with Serrated Edge Suitable for Mixing In Vessels 4/800mm Dia and Depth. All S/S Contact Parts. Fitted with Unit Flange Mounted In Mild Steel Bell Housing.
Item Ref: TH11F-63
FI110-63
11 Kw Variable Frequency Inverter
400/440/3/50 Input, 400/440/3/Variable Output, Constant 24 Amp Current. [ Price Quoted Is For Inverter Only. At Extra Cost We Are Able To Offer Control Panel To Suit Your Specific Application Upon Request.]
Item Ref: FI110-63
GT110-63
Rigal-Bennett Turbine Stirrer 11 kW
Tefc Geared Drive between 200 and 400 Rpm. Length of Stainless Steel Shaft to suit tank. 400 mm Dia Stainless Steel Turbine Disc Unit suitable for Flange Mounting. Also available on 720 Rpm Motor Unit.
Item Ref: GT110-63
GT11F-63
Rigal-Bennett Turbine Stirrer 11 kW Flp
Geared Drive between 200 and 400 Rpm. Length of Stainless Steel Shaft to Suit Tank. 400 mm Dia Stainless Steel Turbine Disc Unit suitable for Flange Mounting. Also available on 720 Rpm Motor Unit.
Item Ref: GT11F-63