New Agitator
Listings page for the selected category, need assistance? Call our advisors now...
+44 (0)1977 661 095 or Click here to ask us for additional information.
Browse our new process plant listings by sub category:
- Axial Tube Dissolver Stirrer
- Bottom entry Shearhead Stirrer
- Clamp On Geared Stirrer
- Clamp On Stirrer
- Combination Mixers
- Contra Rotating Scraped
- Dispersion Mixer
- Dispersion mixer raise/lower TMH range
- Drum/IBC Medium Viscosity Mixers
- Drum/IBC Mixers
- Geared Drum/IBC Mixers
- Inline Continuous Stirrer
- Lab Pilot - Combination Mixers
- Lab Pilot - Sawtooth Dispersion Mixers
- Lab Pilot - Shearhead Mixers
- Lab Pilot - Trifoil Mixers
- Lab Pilot - Turbine Mixers
- Liquiverter Mixer
- Medium speed Mixer
- Medium-Variable speed Mixer
- Scraped Surface Mixers
- Shear Head Stirrer
- Shearhead Duplex Stirrer
- Side & Bottom entry Stirrer
- Slow Speed Mixer
- Slow-Variable Speed Mixer
- Special one of items
- Variable Frequency Inverters
Products in New Agitator 465 Items
GT75SEF-63
R-Bennett Side Mounted Stirrer 7.5 kW Flp
Standard 3 Phase Flp Geared Motor up to 440 Rpm with stainless steel shaft to suit tank and marine paddle. Flange Mounted with mechanical seal or Packed Gland. Mounted in Bell Housing.
Item Ref: GT75SEF-63
AT075-63
R-Bennett 7.5Kw Tubular Vortex Stirrer
3 Phase 1440 Rpm With All Stainless Steel Contact Parts. Length Of Shaft To Suit Tank. Unit Flange Mounted.
Item Ref: AT075-63
AT07F-63
R-B 7.5Kw Flp Tubular Vortex Stirrer
3 Phase 1440 Rpm With All Stainless Steel Contact Parts. Length Of Shaft To Suit Tank. Unit Flange Mounted.
Item Ref: AT07F-63
EH75F-63
Rigal-Bennett Shearhead Mixer 7.5 kW, Flp
Flameproof 3 Phase 2,880 rpm General Purpose Shearhead 115 mm Dia Stainless Steel Contact Parts. Mounting by Flange or Suspending Hook can be selected. Standard shaft length is 750 mm. With High Shear Agitation to get the right blend. But other lengths can be specified at Extra Cost.
Item Ref: EH75F-63
EH753-63
Rigal-Bennett Shearhead Mixer, 7.5 kW, 3 Phase
New Standard 3 Phase, 2,880 rpm drive General Purpose Shearhead 115 mm dia stainless steel contact parts. Mounting by Flange or Suspending Hook can be selected.
Shaft length is standard 750 mm. With high shear agitation to get the right blend. But other lengths can be specified at extra cost.
Item Ref: EH753-63
GP750/PSR
R-B Disc Turbine Paddle Stirrer 7.5Kw
Tefc Gear Drive. 140 Rpm. Length Of S/S Shaft To Suit Above Vessel. Fitted With 1 Off Disc Turbine Paddle With Swept Dia. Of 600mm Fitted With Approx 8 Off Vertical Flat Disc Plates. Exact Detail To Be Confirmed As Per Cad Drg.
Item Ref: GP750/PSR
TMH07F-63
R-B Turbine/Sawtooth Mixer 7.5 Kw Flp
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 600mm. With Max. Lift Of 1200mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 150mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Or Outside Explosive Dangerous Area Where Applicable. With Power Pack.
Item Ref: TMH07F-63
TMH073-63
R-B Turbine/Sawtooth Mixer 7.5Kw
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 600mm. With Max. Lift Of 1200mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 150mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Or Outside Where Applicable. With Power Pack.
Item Ref: TMH073-63
GP750-63
Rigal-Bennett Paddle Stirrer 7.5 kW
Tefc Geared Drive, 30 Rpm. Length of Stainless Steel Shaft upto 1,500 mm with Two 800 mm Dia Stainless Steel Paddles. Unit suitable for Flange Mounting. Also available at 100 Rpm with Two 400 mm Dia Paddles. Additional Spec at Extra Cost.
Item Ref: GP750-63
GP75F-63
Rigal-Bennett Paddle Stirrer 7.5 kW Flp
Geared Drive 30 Rpm. Length of Stainless Steel Shaft up to 1,500 mm with Two 800 mm Dia Stainless Steel Paddles. Unit suitable for Flange Mounting. Also available at 100 Rpm with Two 400 mm Dia Paddles. Additional Spec at Extra Cost.
Item Ref: GP75F-63
GP67A-63
Rigal Bennett Paddle Stirrer 7.5Kw Air
Geared Drive Variable Air Powered Drive 100 To 500 Rpm Length Of Stainless Steel Shaft Up To 1500mm With Two 800 mm Dia Stainless Steel Paddles. Unit Suitable For Flange Mounting.
Item Ref: GP67A-63
GT750-63
Rigal-Bennett Turbine Stirrer 7.5 kW
Tefc Geared Drive between 200 and 400 rpm. Length of Stainless Steel Shaft to suit tank. 400 mm dia Stainless Steel Turbine Disc Unit suitable for Flange Mounting. Also available on 720 rpm motor unit.
Item Ref: GT750-63