New Agitator
Listings page for the selected category, need assistance? Call our advisors now...
+44 (0)1977 661 095 or Click here to ask us for additional information.
Browse our new process plant listings by sub category:
- Axial Tube Dissolver Stirrer
- Bottom entry Shearhead Stirrer
- Clamp On Geared Stirrer
- Clamp On Stirrer
- Combination Mixers
- Contra Rotating Scraped
- Dispersion Mixer
- Dispersion mixer raise/lower TMH range
- Drum/IBC Medium Viscosity Mixers
- Drum/IBC Mixers
- Geared Drum/IBC Mixers
- Inline Continuous Stirrer
- Lab Pilot - Combination Mixers
- Lab Pilot - Sawtooth Dispersion Mixers
- Lab Pilot - Shearhead Mixers
- Lab Pilot - Trifoil Mixers
- Lab Pilot - Turbine Mixers
- Liquiverter Mixer
- Medium speed Mixer
- Medium-Variable speed Mixer
- Scraped Surface Mixers
- Shear Head Stirrer
- Shearhead Duplex Stirrer
- Side & Bottom entry Stirrer
- Slow Speed Mixer
- Slow-Variable Speed Mixer
- Special one of items
- Variable Frequency Inverters
Products in New Agitator 464 Items
SAM-13643-63
R&B Combination Scraped Arm Stirrer & Turbine/Sawtooth Mixer 1.5 & 22Kw Flp
New
Combination Dispersion Mixer Intended For Mobile Containers With A Dia
Up To
1200mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To
Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted
Near Or On The Column With Shaft Speed Indication Stop/Start. Increase
And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control.
Center Mounted Dispersion Mixer Supplied With 22 kw FLPMotor And Frequency
Controller Speed
Range To Give A Range Of 300-1400 Rpm And Fitted With 400mm Dia Disc
Mixing Head. With Center Mounted Top entry 2.2 kw 20 rpm Geared Drive Motor FLP Stainless Steel
with PTFE Hinged Scraper to wipe mixer vessel side wall, Mounted With A
Floating Stainless Steel Lid To Suit With
Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve
Protection. To Allow Head To Raise/ Lower During Mix. Supplied With
Fixing Device, Adjustable Safety Switches Placed On Frame So That
Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper
Edge Of The Container And Second Safety Switch Built Into The Container
Fixing Device. Motor Controller Stop/ Start And Control Panel To Be
Mounted Outside The Working Area Or Outside Explosive Dangerous Area
Where Applicable. With Power Pack.
Item Ref: SAM-13643-63
SAM-13642-63
R&B Combination Scraped Arm Stirrer & Turbine/Sawtooth Mixer 1.5 & 22Kw
New
Combination Dispersion Mixer Intended For Mobile Containers With A Dia
Up To
1200mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To
Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted
Near Or On The Column With Shaft Speed Indication Stop/Start. Increase
And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control.
Center Mounted Dispersion Mixer Supplied With 22 kw Motor And Frequency
Controller Speed
Range To Give A Range Of 300-1400 Rpm And Fitted With 400mm Dia Disc
Mixing Head. With Center Mounted Top entry 2.2 kw 20 rpm Stainless Steel
with PTFE Hinged Scraper to wipe mixer vessel side wall, Mounted With A
Floating Stainless Steel Lid To Suit With
Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve
Protection. To Allow Head To Raise/ Lower During Mix. Supplied With
Fixing Device, Adjustable Safety Switches Placed On Frame So That
Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper
Edge Of The Container And Second Safety Switch Built Into The Container
Fixing Device. Motor Controller Stop/ Start
Item Ref: SAM-13642-63
GP-22003-63
Rigal-Bennett S/S Paddle Stirrer 22 kW
New 22 kW 60 rpm Geared Drive Motor 3 phase 415 V 50 Hz TEFC Flange Mounted Vertical
Down Inline, with Stainless Steel 316 Grade Shaft to Suit Tank with three
1,100 mm Dia Stainless Steel Four Bladed Angle Paddles. Unit Mounted on
Mild Steel Bell Housing with Bearing System to suit vessel and
Application. Suitable for Flange Mounting.
Item Ref: GP-22003-63
EHSB223-63
R-B Bottom Entry or Side Shearhead Mixer 22kw
Continuous Mixer with standard 22 Kw 3ph. 1440 rpm drive. Stainless Steel contact parts 316 grade . General Purpose Shearhead Screen complete with Mechanical Seal Flange Mounting to suit Mixer Tank. . { Please note the price with mechanical seal. a packed gland seal could be supplied with a saving price quoted.}
Item Ref: EHSB223-63
GPR220-63
Rigal-Bennett Rld Paddle Stirrer 22 Kw
Tefc Geared Drive, 40 Rpm. 4100mm Length Of Stainless Steel Shaft To Suit Tank With 1800mm Dia Three Bladed Stainless Steel Paddles With Rubber Lining. Unit Mounted On Mild Steel Bell Housing Suitable For Flange Mounting.
Item Ref: GPR220-63
GP220F-63
Rigal-Bennett Paddle Stirrer 22 kW Flp
22 kW Geared Drive, 30 Rpm Flp Zone Motor. Length of Stainless Steel Shaft to suit tank with Two 1,100 mm Dia Stainless Steel Four Bladed Angle Paddles. Unit mounted on Mild Steel Bell Housing with Bearing System and Packed Glands to suit Vessel and Application. Suitable For Flange Mounting.
Item Ref: GP220F-63
GP2200-63
Rigal-Bennett Paddle Stirrer 22 kW
22 kW 47.5 rpm Geared Drive Motor Hollow Shafted Flange Mounted Vertical Down, with Stainless Steel 316 Grade Shaft to Suit Tank with three 1,100 mm Dia Stainless Steel Four Bladed Angle Paddles. Unit Mounted on Mild Steel Bell Housing with Bearing System to suit vessel and Application. Suitable for Flange Mounting.
Item Ref: GP2200-63
TMH223-63
R&B Turbine/Sawtooth Mixer 22Kw
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 1200mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 400mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Or Outside Explosive Dangerous Area Where Applicable. With Power Pack.
Item Ref: TMH223-63
TMH22F-63
R&B Turbine/Sawtooth Mixer 22Kw Flp
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 1200mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 400mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Where Applicable. With Power Pack.
Item Ref: TMH22F-63
TV22F-63
Rigal Bennett Saw tooth Mixer 22 kW Flp
New Dispersion Mixer with Variable Speed 22 kW Flp 400/2,870 Rpm Drive. 300mm Dia Disc Mixing Head with Serrated Edge Suitable for Mixing In Vessels 8/1,600mm Dia and Depth. All Stainless Steel Contact Parts. Unit Flange Mounted In Mild Steel Bell Housing
Item Ref: TV22F-63
EH223DH-63
R&B Duplex Shearhead Mixer 22 kW
Standard 3 Phase 1,440 Rpm Drive General Purpose Duplex Shearhead 180 mm Dia Stainless Steel Contact Parts. Mounted in Mild Steel Bell Housing to suit. To be supplied without a bottom steady bearing with flange mount. Shaft Length is 1,450 mm. [Intermediate Propeller can be Specified at Extra Cost.]
Item Ref: EH223DH-63
EH22FDH-63
R&B Duplex Shearhead Mixer 22 kW Flp
Standard 3 Phase 1,440 Rpm Flp Drive General Purpose Duplex Shearhead 180 mm Dia Stainless Steel Contact Parts. Mounted in Mild Steel Bell Housing to suit to be supplied without a bottom steady bearing with flange mount. Shaft Length is 1,450 mm. [Intermediate Propeller can be Specified at Extra Cost.]
Item Ref: EH22FDH-63