S/S Heated 1/2 coiled

Stainless Steel 316L with S/S Limpet Coils Chamber 3,050 dia X 5,180mm S/S with Dished Bottom to 150mm dia Outlet & Dished Top 610mm dia Manway Top 6 Off 150mm dia Inlets 1 Off 100mm dia Inlet Connection with Top Center Port for Agitator. Reactor Body Overall Height 6,575mm Tall mounted on legs to give 2,100mm Ground Clearance  Or an overall height of 8,740mm 45 Psi Internal 90 Psi In Limpet Coil extra for agitator depends on specification.

Stainless Steel 316 grade chamber 2,300mm dia x 3,530mm deep dish top and bottom.  Top with 500mm dia manway, 250mm dia, 2 off 150mm dia, 2 off 100mm, dia 2 off 75mm dia, 2 off  50mm dia, 25mm dia, with 150mm dia bottom outlet. With center mounted 45 kW  48 rpm Eexdiib T4 Motor made by Curtis Mixer.  Model CM-5065-4220-A-9-97 packed gland seal with 2 off four bladed angle paddles. Internal operating pressure 3.6 Bar/Full Vac Test pressure 6.5 Bar. External 1/2 coil operating pressure 6.5 Bar Test pressure 8.9 Bar. External. 165 deg. C built to CAT BS5500 Cat 2 1991   

Stainless Steel 2540 mm Dia x 2,240 mm Dish Top & Bottom with central 610 mm dia connection to suit Agitator , 610 mm dia Manway Connection. 250 mm dia vent connection 10 off 100 mm dia inlet connection with 150 mm dia bottom outlet. Stainless steel 1/2 coil or limpet with 60 mm dia in/outlets on straight side and bottom 1/2 coil or Limpet Jacket section Built to ASME 1974 Version VIII Coil Design Pressure 2.4 Bar/Full Vacuum Coil 5.2 Bar Chamber Test pressure 3.6 Bar Jacket Test pressure 9.3 Bar

Temperature Design pressure 50 deg.c both sides  empty weight 3,650 kg. [ Please note we can offer to supply with stirrer system to suit client]

Key Features

• Capacity: 11,500 litres

• Construction: Stainless steel

• Dimensions: 2,540 mm diameter x 2,240 mm dish top & bottom

• Central Connections:

  • 610 mm diameter for agitator mounting

  • 610 mm manway connection for access and maintenance

• Vents & Inlets:

  • 250 mm dia vent connection

  • 10 × 100 mm dia inlet connections

• Discharge Outlet: 150 mm dia bottom outlet

Jacket & Coil System

• Stainless steel ½ coil or limpet coil jacket

• 60 mm dia inlets/outlets on straight side and bottom

• Designed for heating or cooling process liquids efficiently

Pressure & Temperature Ratings

• Coil Design Pressure: 2.4 bar / Full Vacuum

• Coil Test Pressure: 5.2 bar

• Chamber Test Pressure: 3.6 bar

• Jacket Test Pressure: 9.3 bar

• Design Temperature: 50 °C (both sides)

Additional Details

• Empty Weight: 3,650 kg

• Built to ASME VIII standards for safety, reliability, and compliance

Stainless Steel  316L 1/2 coiled Jacketed chamber 2,400 mm dia x 2,400 mm deep , dish top & bottom with 80 mm dia outlet. Dish top with 450 mm dia manway, 2 x 500 mm dia , 4 x 150 mm dia  inlet connections. Chamber Working pressure 6 bar / vacuum . Jacket Working pressure 13 Bar. Fitted with 15 kw propeller type stirrer 2,500 mm dia x 2,500 mm x 6,500mm tall. 

Stainless steel 316Ti  2,200 mm dia x 3,000 mm deep dish top and bottom to 100 mm dia outlet dish top with 600 mm dia manway, 2 off 300 mmdia 3 off 80 mm dia  inlets 8/33 kw 160 -320 rpm stirrer dissolver propeller chamber working pressure 3 bar/ full vacuum Jacket working pressure 6 bar. overall size 3,000 mm x 3,000 mm x 6,000 mm tall.

Stainless Steel [1.4435] Reactor chamber  2,200mm x 2,120mm deep Dish Top & Bottom Dished top, with 500mm dia + 9 connections  80mm dia bottom outlet. Working pressure vac/3.2bar, Test pressure 4.8 bar max. temp -20/+250 deg. C with half coil jacket. Working pressure 16 bar, Test pressure 25 bar 17.5 kW EX  v speed stirrer made by Spiess.  Overall size 2,500mm x 2,500mm x 5,700mm tall made by Hagemann GmbH 

Stainless Steel [1.4435] Reactor Chamber  2,000mm x 1,800mm deep Dish Top & Bottom. Dished top with 500mm dia + 9 connections  170mm dia bottom outlet.  Working pressure vac/3.2bar, Test pressure 4.8 bar max. temp  +200 deg. C with half coil jacket.  Working Pressure 16 bar, Test pressure 25 bar 17.5 kW 22 - 100 Rpm Angle Paddle Stirrer EX v speed stirrer made by Spiess.  Overall size 2,500mm x 2,500mm x 5,700mm tall made by Hagemann GmbH. 

Stainless steel 316L Chamber with Stainless Steel 304L 1/2 coil limpet jacket 1,800 mm dia x 2,000 mm deep. Dish top & bottom  chamber rated -1 to +3 bar 1/2 coil jacket +13 bar -10 to +200 deg.C.  Fitted with 7.5 kw FLP paddle stirrer.  

Stainless Steel with 1/2 Coil Jacket with S/S Chamber 1,900mm dia X 1,800mm Deep. Dish Top and Bottom to 50mm dia Outlet. With 450mm dia Manway, 3 Off 50mm Inlets with Sight Glass. With Outer Scraped Anchor and Inner Off-Center Continuous Worm Screw 280mm Dia.  Both driven by 12.5 kW 93 rpm Geared Drive   Made by J. Serra. Chamber Working Pressure 2 Bar, 1/2 Coil Jacket Working Pressure 2 Bar.

Stainless steel chamber 1,400 mm dia x 2,000 mm deep with 700 mm deep cone to about 63 mm dia out let with

made by Echo Engineering

 chamber 3 bar/ full vac test 4.95 bar 180 deg

jacket 1/2  Design pressure 6.9 bar test pressure 11.7 bar

weight 1325 kg

mounted in ms frame 2.1m cx 2.7m x 5 m high.

Stainless steel with 1/2 coil jacket.   Scraped surface mixing vessel 1,700mm dia X 1,400mm d eep. Dish Top and Bottom with 50mm dia outlet. Center mounted anchor gate stirrer 15 kW Variable speed drive 10 to 70 rpm and Off-Center 30 kW

1,460 rpm Sawtooth Dispersion Disc Mixer. Chamber 1 Bar/Full Vac. Stainless Steel 1/2 Coil Jacket 5 Bar W.P. Lid with 450mm Dia Manway and 4 off 40mm dia inlet connections. Unit mounted in with mild steel hydraulic frame to Raise/Lower Stainless Steel Lid for cleaning. Overall size 2,600mm X 2,400mm X 4,000mm Tall. Stainless Steel 316 grade.

Top with 450mm dia manway, 250mm dia,  200mm dia , 150mm dia & 8 off 50mm dia inlets, with 75mm dia bottom outlet. Made by Quest International Ltd.

Stainless Steel 316 grade Made by Calderia Teruel Chamber rated 1,400 mm dia x 1,600 mm deep dish top and bottom Top with 400 mm dia , 150 mm dia 100mm dia sight glass, 3 off 50 mm dia and 2 off 40 mm dia inlets. side with 200 mm dia  and 6 off 50 mm dia connections with 50 mm dia bottom outlet Chamber Design temp 50 deg.c, Design Pressure -1/3.5 Bar Test 5.5Bar operating pressure -1/3 bar.  Coil design temperature 18/50 deg.c Design Pressure 8 Bar Test Pressure 12 Bar Working Pressure 7 Bar Built 2021 fitted with 2.2 kw 72 rpm seven pumps & mixers 800 mm swept dia Paddle stirrer. Overall size 1,450mm x 1,450mm x 2,800mm tall,

2,000 Litre Stainless Steel 316 Half-Coil Jacketed Reactor Vessel

Manufacturer: Calderería Teruel
Year of Manufacture: 2021

Vessel Construction

• Nominal Capacity: 2,000 Litres
• Material of Construction: Stainless Steel 316
• Internal Vessel Dimensions:
  • Diameter: 1,400 mm
  • Straight Side Depth: 1,600 mm
• Dished Top and Bottom Construction
• Design Temperature: 50°C
• Design Pressure: -1.0 / +3.5 Bar
• Test Pressure: 5.5 Bar
• Operating Pressure: -1.0 / +3.0 Bar

Heating / Cooling System

• External Half-Coil Jacket Construction
• Coil Design Temperature: 18°C to 50°C
• Coil Design Pressure: 8 Bar
• Coil Test Pressure: 12 Bar
• Working Pressure: 7 Bar

Top Connections

• 1 x 400 mm Diameter Manway
• 1 x 150 mm Diameter Connection
• 1 x 100 mm Diameter Sight Glass
• 3 x 50 mm Diameter Connections
• 2 x 40 mm Diameter Connections

Side Connections

• 1 x 200 mm Diameter Connection
• 6 x 50 mm Diameter Connections

Bottom Connections

• 1 x 50 mm Diameter Bottom Outlet

Agitation System

• Top Entry Paddle Stirrer
• Motor Power: 2.2 kW
• Gearbox Output Speed: 72 RPM
• Paddle Sweep Diameter: 800 mm

Ancillary Equipment

• Fitted with Seven Process Pumps and Mixers

Overall Dimensions

• Length: 1,450 mm
• Width: 1,450 mm
• Height: 2,800 mm

Design Features

• Stainless Steel 316 product contact surfaces
• Pressure and vacuum rated vessel
• Half-coil jacket suitable for heating and cooling duties
• Multiple top and side process connections
• Large access manway for inspection and maintenance
• Low-speed paddle agitation for blending, suspension and gentle mixing

1,400L S/S 1/2 Coiled Reactors  2.2kw Stainless Steel 316 Grade Chamber. Made by Calderia Teruel Chamber rated 1,200 mm dia x 1,500 mm deep dish top and bottom Top with 350 mm dia , 100 mm dia Sight Glass 100mm dia sight glass, 6 off 50 mm dia . side with 100 mm dia  and 6 off 50 mm dia connections with 4 off 50 mm dia bottom outlets with centre 75 mm dia outlet. Chamber Design temp 50 deg.c, Design Pressure -1/3.5 Bar Test 5.5Bar operating pressure -1/3 bar Coil design temperature 18/50 deg.c Design Pressure 8 Bar Test Pressure 12 Bar Working Pressure 7 Bar Built 2021. fitted with seven pumps & mixer 2.2 kw 900 mm swept dia paddles.  Overall size 1,250mm x 1,250mm x 2,100 mm tall.

1,400 Litre Stainless Steel 316 Half-Coil Jacketed Reactor Vessel

Manufacturer: Calderería Teruel
Year of Manufacture: 2021

Vessel Construction

• Capacity: Approximately 1,400 Litres
• Material of Construction: Stainless Steel 316
• Internal Vessel Dimensions:
  • Diameter: 1,200 mm
  • Straight Side Depth: 1,500 mm
• Dished Top and Bottom Construction
• Design Temperature: 50°C
• Design Pressure: -1.0 / +3.5 Bar
• Test Pressure: 5.5 Bar
• Operating Pressure: -1.0 / +3.0 Bar

Heating / Cooling Coil

• External Half-Coil Jacket Construction
• Coil Design Temperature: 18°C to 50°C
• Coil Design Pressure: 8 Bar
• Coil Test Pressure: 12 Bar
• Coil Working Pressure: 7 Bar

Top Connections

• 1 x 350 mm Diameter Manway
• 2 x 100 mm Diameter Sight Glasses
• 6 x 50 mm Diameter Process Connections

Side Connections

• 1 x 100 mm Diameter Connection
• 6 x 50 mm Diameter Connections

Bottom Connections

• 4 x 50 mm Diameter Bottom Outlets
• 1 x 75 mm Diameter Centre Outlet

Agitation System

• Top Entry Mixer
• Motor Power: 2.2 kW
• Paddle Agitator
• Approximate Paddle Sweep Diameter: 900 mm

Ancillary Equipment

• Fitted with Seven Process Pumps (details available upon request)

Overall Dimensions

• Length: 1,250 mm
• Width: 1,250 mm
• Height: 2,100 mm

Typical Applications

Suitable for:

• Chemical processing
• Adhesives
• Resins
• Water treatment products
• Pharmaceutical intermediates
• Food ingredient blending
• General liquid mixing, heating and cooling duties