Tank Mounted Dispersion Dissolver Mixers

Used 5,000 litre stainless steel heavy-duty mixing system, manufactured by Turello, type TMR 7000/3, total installed power 190 kW.

The stainless steel mixing chamber is approximately 1,950 mm diameter × 1,950 mm deep, with dished top and bottom, and is fitted with:

• 1 × 30 kW central anchor scraper mixer

• 2 × 75 kW off-centre high-speed incorporator mixers

All mixing elements are hydraulically driven.

The stainless steel chamber is mounted within a mild steel support frame, approximately 3,000 mm × 3,000 mm × 5,000 mm high.

The unit is currently dismantled for storage and ease of transport.

Previously used for mixing cementitious grouts and high-viscosity construction adhesives (“No Nails” type products).

Location: United Kingdom
Available for inspection by appointment.

The mixer can be supplied in its current condition, or alternatively a quotation can be provided for reassembly, inspection, and servicing prior to delivery.

Key Specifications

• Manufacturer: Turello

• Model: TMR 7000/3

• Nominal capacity: 5,000 litres

• Total installed power: 190 kW

• Construction: Stainless steel chamber

• Drive system: Hydraulic

Mixing Configuration:

• Central anchor scraper agitator – 30 kW

• 2 × Off-centre incorporator mixers – 75 kW each

Vessel Dimensions:

• Chamber size: approx. 1,950 mm dia × 1,950 mm deep

• Dished top and bottom

Support Frame:

• Mild steel construction

• Approx. 3,000 mm × 3,000 mm footprint × 5,000 mm high

Stainless steel Rigal Bennett Combination Mixer suitable for a wide range of mixing, dispersion, and homogenisation applications.

The 2,000 litre vessel measures approximately 1,320 mm diameter x 1,400 mm deep and features a 225 mm deep conical bottom tapering to a 100 mm diameter outlet for efficient discharge.

Fitted with a top-entry, bridge-mounted stainless steel anchor agitator, driven by a 4 kW geared motor at approx. 30 rpm. The anchor is equipped with PTFE hinged wall scrapers to ensure thorough mixing and improved heat transfer.

An off-centre high-speed sawtooth disperser, driven by a 7.5 kW motor at approx. 2,880 rpm, is mounted on a mild steel raise/lower frame, allowing accurate positioning of the disperser within the vessel.

The mixer is supplied on a mild steel working platform measuring approximately 2,200 mm x 1,600 mm, with a working height of 630 mm. Overall height approx. 3,550 mm.

Control panel available at extra cost.

Typical applications:
Starch, adhesives, coatings, polymers, resins, food and chemical products