Heaters Oil - Water
ND-14478-22
Remeha Quinta ACe 160 gas fired wall mounted boilers
Remeha Quinta ACe 160 gas fired wall mounted boilers
Type: Wall-mounted gas boiler
Model: Quinta ACe 160
Fuel: Natural gas
Application: Domestic or light commercial heating
Nominal heat output of up to approximately 152 kW for central heating under standard conditions (80/60 °C)
Key Features: Compact design, high efficiency, reliable performance, easy installation
Ideal for wall-mounted heating solutions requiring a combination of efficiency and space-saving design.
Item Ref: ND-14478-22
ND-11713-22
Beeston Bisley Water Heater 7/137 Gas fired
Used Gas Fired Boiler with NNU - Way burner 30 to 137 kW 4 Bar Working pressure 58 PSI with 50mm dia inlet & outlet Overall Size 650mm x 1,700mm x 1,220mm tall
Item Ref: ND-11713-22
ND-11712-22
12 - 120 Kw Remeha Hot Water Boiler Model GAS210ECO
Used Gas Fired high efficiency condensing hot water boiler rated 12 to 120 Kw [ 50,000 to 410,000 BTU] maximum working pressure 6 Bar [ 87 PSI] with 32mm dia in and out let connections overall size 500 mm x 1220 mm x 1300 mm high
Item Ref: ND-11712-22
BHS-12778-22
96 kw Tri Cool Sheik S6 96 kw Electric Oil Heater Model 30-5 180 deg.c
Electric oil heater 96 kw 3 phase 50 hz supply with centrifugal pump 500 Lpm at 1.9 bar with 70 l expansion tank with oil process 2.5" dia PN 16 flange connections, cooling 1" BSP connections 1/2 " dia drain overall size 1,750mm x 800mm x 1720 mm + 710 mm for the 70 L expansion tank.
Item Ref: BHS-12778-22
ND-14431-22
Alphannotec Brine/Water Heat Pump Type SWP 1600
Electrically Heated 36.7 kw 3 phase rated 15.2 m.cu/hr temperature range +20 to 55 Deg.c. -5 to 25 Deg.C
with R407C 20.7 Deg.c with 2.5" dia in/ outlet for heat source. hot water in & outlet
Over all size 2,055mm x 900mm x 2,100 mm tall.
Item Ref: ND-14431-22
ND-12517-22
9.9 kW Regloplas Hot Water Heater Type P140s
Compact hot water heater 9.9 kW 140 Deg.c with digital controller 15 amp 400 Volt
with 1/2 " dia connection on both heating and cooling in/outlets flow rate 45 LPM at 8 Bar. overall size 700 mm x 230 mm x 610 mm tall.
Item Ref: ND-12517-22
N10842-22
Tool-Temp 9kw Water Temperature Control Unit Type TT4000
3 Phase 9 Kw Water Temperature Control Unit up to 100 deg.c Mounted in case on casters overall size 360mm x 920mm x 920mm tall
Water heater
Item Ref: N10842-22
ND-14260-22
Power: 9.9 kW Maximum Temperature: 140°C Digital Controller: Included for precise temperature management Electrical Requirements: 15 Amp, 400 Volt Inlet/Outlet Connections: Flow Rate: 60 liters per minute (LPM) at 8 bar pressure Overall Dimensions: 700 mm (length) x 230 mm (width) x 610 mm (height)
9.9 kW Regloplas Hot Water Heater Type P140M
Compact hot water heater 9.9 kW 140 Deg.c with digital controller 15 amp 400 Volt
with
3/4" " dia connection heating and 1/2" dia cooling in/outlets flow
rate 60 LPM at 8 Bar. overall size 700 mm x 230 mm x 610 mm tall.
- Heating: 3/4" diameter
- Cooling: 1/2" diameter
Item Ref: ND-14260-22
N10848-22
Churchill Oil Heater 6 Kw
Compact type oil heater 6 Kw 3 phase 50 Hz 15 Amp. 0 to 120 Deg.c 660mm x 510mm x 1080mm Tall
Item Ref: N10848-22
N10957-22
Churchill Oil Heater Model 6-200 6 kW
Compact type oil-cooler heater 3 Phase 415V 50 Hz
Overall size 310mm x 800mm x 950mm Tall.
Model 6 200 [needs a new digital controller]
Item Ref: N10957-22
S8362-22
Harvard Thermocirculators, 1 Kw
1 Ph. 1000 Watt. Cat. No. 50-1940 External Size 290mm High 165mm Wide 330mm Deep With 12mm Connections
Item Ref: S8362-22
S9853-22
In-Line S/S Heater Approx 1 Kw
Stainless Steel In-Line. Electric 1 Ph Water Heater. 75 mm Dia X 440 mm Long. 12.5 mm Connections. Lagged And Sheeted.
Item Ref: S9853-22
S8361-22
Churchill Thermocirculators, 1 Kw
1 Ph. 1000 Watt. Model No. 00189.Temperature Ambient To 60 Deg C Internal Capacity 3 Pints Overall Size 290mm High 165mm Wide 330mm Deep 6mm Connections
Item Ref: S8361-22