Tanks Stirred Vertical Heated - Paddle - Marine - Turbine

8,000-litre stainless steel paddle mix tank fitted with a mild steel jacket tested to 85 P.S.I., designed for efficient heating and mixing duties. The vessel measures approximately 2,000 mm diameter x 2,600 mm deep, with 700 mm deep cone bottom with a central 80 mm dia outlet for complete discharge. mounted on legs to give 1,650 mm ground clearance.

Supplied with a flat, bolted, removable stainless steel lid, incorporating a mild steel support bridge. Mixing is achieved via a centre-mounted turbine agitator, driven by a 7.5 kW motor, operating at approximately 80 RPM.

Key Features

• Capacity: 8,000 litres

• Construction: Stainless steel vessel

• Heating Jacket: Mild steel, pressure tested to 85 PSI

• Dimensions: Approx. 2,000 mm diameter x 2,600 mm straight side

• Cone Bottom: 700 mm deep conical base

• Outlet: 80 mm diameter central discharge for complete emptying

• Ground Clearance: 1,650 mm on support legs

Agitation System

• Centre-mounted turbine agitator

• 7.5 kW drive motor

• Operating speed approx. 80 RPM

• Mild steel support bridge integrated into lid structure

Lid Arrangement

• Flat, bolted, removable stainless steel lid

• Designed for secure operation and easy maintenance access

8,000-litre stainless steel paddle mix tank fitted with a ½-coil stainless steel water jacket Test Pressure 7.9 Bar Design Pressure 5 Bar at 150 deg.c , suitable for heating and temperature control applications. The vessel measures approximately 2,200 mm diameter x 2,200 mm deep and features a dished bottom with a 80 mm diameter outlet for efficient discharge. Made By Benson-Sedgwick

The tank is mounted on mild steel support legs and equipped with a centre-mounted turbine impeller stirrer, driven by an approximately 7.5 kW motor operating at around 80 RPM. Internally, the vessel is fitted with four baffles to promote effective mixing.

• Volume: 8,000 litres

• Dimensions: 2,200 mm dia × 2,200 mm deep

• Construction: Stainless steel with ½-coil water jacket

• Bottom: Dished with 70 mm outlet

• Support: Mild steel legs

• Agitator: Centre-mounted turbine impeller, 7.5 kW, ~80 RPM

• Internal Baffles: 4 for efficient mixing

Ideal for heating, blending, and uniform mixing applications.