Grinders Dry Pin, Disc & Cone Mills

Listings page for the selected category, need assistance? Call our advisors now...
+44 (0)1977 661 095 or Click here to ask us for additional information.

Browse our used process plant listings by sub category:

Products in Grinders Dry Pin, Disc & Cone Mills 18 Items

S5641-59
Glen Creston Lab Sample Mill Type S300
0.18 Kw 3000 Rpm Drive,With Hopper & 1.7 L Nickel Plated Sample Container Maximum Recommended Particle Size To Be Ground 9 M/M,Single Phase
Item Ref: S5641-59
More info
S9084-59
Retsch Mixer Mill Type Mm2 10 Ml Pot
Grinds & Homogenizes Soft Fibrous Hard & Brittle Material In The Dry Wet & Cooled Condition.Timer & Oscillating Control Coolant Attachment Glen Creston Type 31-700
Item Ref: S9084-59
More info
ND-12570-11
Hosokawa Mikropul ACM 15 S/S
Stainless Steel Air Classifying Mill  with screw feed and cyclone reverse jet filter discharge.


Item Ref: ND-12570-11
More info
N9888-11
Hosokawa Mikropul Acm15 Mkii
Air Classifying Mill Mild Steel construction with Chiroplex Classifier Pin and Stator with 12.5 kW drive with Vibrator Feed Chute through to Mikropul Reverse Jet Dust Filter with rotary discharge valve.
Blower Fan to suit.  Footprint for Unit is 2,000mm Wide X 4,500mm Deep X 6,000mm Tall. (Previously Milling from 2.5mm to 9 Microns) Serial Number 93 JB 6
Item Ref: N9888-11
More info
RC1422-11
Kek M/S Pin Mill Model 2H 30 Kw

Mild Steel pin mill with turbine parts as well

Item Ref: RC1422-11
More info
S5641-50
Glen Creston Lab Sample Mill Type S300
0.18 Kw 3000 Rpm Drive,With Hopper & 1.7 L Nickel Plated Sample Container Maximum Recommended Particle Size To Be Ground 9 M/M,Single Phase
Item Ref: S5641-50
More info
ND-11987-11
Hosokawa Micron Grinder Classifier Drier S/S JKTD Type MDV - 4
Stainless Steel Rotary Grinder Classifier Rotary Drier chamber about 910mm dia x 3,500mm deep with 45 kW 1,500 rpm belt drive rotor motor and 3.7 kW 1,300 rpm. Previous duty on flour Classifier max Air input temperature 450 deg. C, air capacity 100 to 200 Meters cu/min. Max evaporation 1,200 kg/hr of water.  Overall size 2,200mm x 1,450mm x 4,500mm tall 
Item Ref: ND-11987-11
More info
RC1367-11
Engug M/S cone mill 75Kw

Mild steel cone mill with approx. 700mm dia Rotor with water cooling and manual gap adjustment. with 75 kw 960 RPM belt drive to give about 250 RPM,  Overall size 3500mm x 1500mm x 1900mm Tall.

Item Ref: RC1367-11
More info
N10208-11
S/S Micronizer Fluid Energy Mill Size 4
Stainless Steel Fluid Energy Classifier Mill With 100mm Dia Chamber. Output 2/5 K/H. Produces Materials Of 5 Micron & Below. Grinding By Attrition With Compressed Air.
Item Ref: N10208-11
More info
N2619-11
Cone Disc Mills M/S 1.1 Kw
Italian Manufacture,Coned 200 mm Disc With Hopper Feed, Mounted On Pedestal With Height Adjustment,Fitted On Castors
Item Ref: N2619-11
More info
N7398-11
Pascall Cone Mill No. 20807 3 Hp Drive
With Mild Steel Cones, Rotor Cone With Vernier Calibration. 205 mm Dia. Cones With Vibrator Feed And 3 Hp Belt Drive.
Item Ref: N7398-11
More info
N4787-11
Sturtevant 225 Mm Disc Grinder 2.2 Kw
Machine No 792107 & 792109 2.2 Kw 1440 Rpm V Belt Drive. Bed Plate Mounted,
Item Ref: N4787-11
More info