Used Process Plant » Conveyors

Conveyors

Listings page for the selected category, need assistance? Call our advisors now...
+44 (0)1977 661 095 or Click here to ask us for additional information.

Browse our used process plant listings by sub category:

Products in Conveyors 88 Items

Conveyors » Screw Conveyor U Section
ND-14009-39
Stainless Steel U section Conveyor 400 mm dia 450 x 7m long
Stainless Steel U section conveyor 400 mm wide x 450mm deep x 7,000mm long with bolt removable lid 600 mm 450 mm inlet and 270 mm dia outlet with 11kw 69 rpm geared drive motor. overall size  630 mm x 8,050mm x 775 mm deep. weight about 1,300 kg. Made by Wright Dowson.
Item Ref: ND-14009-39
More info
Conveyors » Screw Conveyor U Section
ND-13959-39
M/S U Section Conveyor 380 mm x 400 mm x 4m long
Mild Steel U section conveyor 380 mm wide x 400 mm deep x 4,000mm long, with 370 mm x 370 mm outlet.
Mild steel galvanized feed hopper  1,000mm x 3,000mm x 1,500 deep one end and 500 mm the other. with 1.5 kw 140 rpm gear drive motor.

Item Ref: ND-13959-39
More info
Conveyors » Flat Belt
ND-13969-39
Flat Belt Flighted Conveyor - Belt Length 2,300mm
Overall Dimensions: Height 1,400mm x Width 350mm x Length 2,300mm flights 25 mm high with 300mm pitch
Motor: 0.12kw, Single Phase, 240V 
Item Ref: ND-13969-39
More info
Conveyors » Flat Belt
N8454-39
Flat Belt Conveyor 350Mm.Wide X 2800Mm.
White Rubber Belt.With Stainless Steel Top 400mm.Wide Mounted On Stainless Steel Frame 820mm.High.With Variable Speed Drive And Timer Contrl.
Item Ref: N8454-39
More info
Conveyors » Flat Belt
N9709-39
Flat Belt Conveyor 350Mm Wide X 3600Mm
Stainless Steel Table And Frame With White Rubber Belt.
Item Ref: N9709-39
More info
Conveyors » Flat Belt
N10197-39
Flat Belt Conveyor 350Mm X 3600Mm
Stainless Steel Trough Frame With 400mm Feed Height And 930mm Discharge Height With White Rubber Belt 350mm X 3600mm Long With 0.37Kw 72 Rpm Geared Drive.
Item Ref: N10197-39
More info
Conveyors » Link Belt
ND-12046-39
3 Lane Plastic Link Belt Collating Conveyor
Three lane plastic link belt conveyor each belt 110mm wide = 340mm wide x 1,200mm long mounted on a frame 1,000mm tall with variable speed geared drive 0.75 kW 0 to 65 rpm.  Overall size 1,000mm x 1,600mm x 1,000mm tall.
Item Ref: ND-12046-39
More info
Conveyors » Miscellaneous
ND-12001-39
Carrier Belt & Bucket M/S Elevator 11m Lift
Mild Steel Belt & Bucket Elevator with 100 buckets 300mm x 170mm x 95mm deep with 228mm pitch to give 1,1000mm of lift
Item Ref: ND-12001-39
More info
Conveyors » Miscellaneous
RC1065-39
Belt & Bucket Elevator M/S 7M Lift
Mild Steel Belt And Bucket Elevator With 150mm Wide Buckets With Geared Motor To Suit
Item Ref: RC1065-39
More info
Conveyors » Screw Conveyor U Section
RC674F-39
S/S U Trough Conveyor 300Mm X 4.5M Long
New U Trough S/S 316 Conveyor 300mm Dia X 4,500mm Long. Trough Fabricated in 3mm S/S Grade 316. Screw Flight from 3mm Thick Material stitch welded to 73 dia centre shaft. One Outlet Fitted at drive end. One hanger bearing fitted. Covers are bolted and sealed. Drive Motor to Ip55, 415/3/50. Final drive via Chain and Sprocket, Fully Guarded, Finish Outer Trough 'Bead Blast'. Supplied fully assembled. Starter not included.
Item Ref: RC674F-39
More info
Conveyors » Screw Conveyor U Section
RC674G-39
U Trough Conveyor S/S 300Mm X 12M Long
300mm Dia X 12000mm Long. Trough Fabricated From 3mm S/S Grade 316. Screw Flight From 3mm Thick Material Stitch Welded To 73mm Dia Centre Shaft. One Outlet Fitted At Drive End. Three Hanger Bearings Fitted. Covers Are Bolted And Sealed. Drive Motor To Ip55 415/3/50. Final Drive Via Chain And Sprocket, Fully Guarded. Finish Outer Trough 'Dull Polish'. Supplied Fully Assembled. Starter Not Included.
Item Ref: RC674G-39
More info
Conveyors » Screw Conveyor U Section
N9500-39
S/S U Section Conveyor 300Mm X 2000Mm
Stainless Steel 300 mm Wide X 350mm Deep X 2000 mm Long With Bolt On Lid Top With 280mm X 455mm Inlet. With Feed Shoot 1,400 mm x 850 mm x 560 mm deep with internal grid. Bottom End 340mm X 250mm Outlet. Opposite End 75mm Dia Drain. Mounted On Mild Steel Frame To Give A 10 Degree Angle To Give 700mm Ground Clearance From Discharge.

Stainless Steel U-Section Conveyor – 300 mm x 2000 mm

A compact, robust stainless steel U-section conveyor designed for controlled transfer of bulk materials. Complete with bolt-on lid, feed chute, and supporting frame set at a fixed incline for efficient product flow.

Key Features

  • 300 mm wide conveyor channel

  • 2,000 mm overall length

  • Deep U-section design for improved containment

  • Stainless steel construction with bolt-on top lid

  • Integrated feed chute with internal safety grid

  • Discharge end positioned at 700 mm height via mild-steel support frame

Conveyor Specifications

  • Channel Size: 300 mm wide × 350 mm deep × 2,000 mm long

  • Top Lid: Bolt-on stainless steel cover

  • Inlet Opening: 280 mm × 455 mm

  • Outlet (Bottom End): 340 mm × 250 mm

  • Opposite End: 75 mm dia drain connection

Feed Chute Details

  • Dimensions: 1,400 mm (L) × 850 mm (W) × 560 mm (Deep)

  • Features: Internal grid for product control and safety

Mounting & Orientation

  • Mounted on a sturdy mild-steel frame

  • Fixed 10° incline for consistent product discharge

  • Provides 700 mm ground clearance at the outlet


Item Ref: N9500-39
More info