Stainless Steel with M/S Bolt on Jacket 1,200 mm X 1,150 mm Deep with Hemispherical Base to 75 mm Dia Outlet. 2.2 kW 49 Rpm Anchor Stirrer. Mounted on Four Legs to give 500 mm Ground Clearance. Jacket suitable for 20 Psi W.P. Chamber Lid with Various Connections.
1,000 L S/S Giusti Hemispherical JKTD Scraped Surface Mixing Pan 7.5 kW
Stainless Steel Hemispherical Vessel with Mild Steel Jacket Test pressure 80 P.S.I. Working pressure 40 P.S.I. 1,200 mm dia x 1,200 mm deep to 38 mm dia outlet, mounted on 3 legs to give 610 mm ground clearance. With bridge to suit with 7.5 kW Stainless Steel Anchor Scrape Surface Stirrer with PTFE Hinged Scrapers. Hinged lid on both sides of bridge brim height 1,870 mm. Overall height 2,600 mm.
1,140 Litre Stainless Steel Vessel 1,520mm Dia with Contra Rotating Scraped Mixer for viscous materials. Jacketed for 40 Psi Steam Heating with Mechanical Lift for the stirrer mechanism and tilt for discharge.
Used Rigal Bennett WE560-63 Stainless Steel Vessel 1,450 mm dia x 1,785 mm deep with cone bottom to 50 mm dia outlet, with mild steel water fill jacket with 2 off 18 kW Immersion Heater elements. Mounted on 4 mild steel legs to give 1,200 mm ground clearance. With mild steel bridge to suit Rigal Bennett VP750-63 7.5 kW 25 to 125 Rpm variable speed anchor stirrer. Stainless steel lid hinged on both sides of the bridge. Overall height 4,700 mm tall.
Stainless Steel 316L Grade Chamber with Stainless Steel outer cladding with rockwool insulation jacket 1700mm Dia x 1570mm deep, 300mm deep cone bottom to 100mm dia outlet. cone top with 500mm Manway 4 off 100mm inlets, 2 off CIP connections, with 4 off bottom entry steam injection ports, with central 3 Kw Anchor stirrer and 5.5 Kw off centre Auger. overall height 2675mm.
Stainless steel chamber with mild steel jacket chamber 1,900mm dia x 1,600 mm deep dish bottom to 70 mm dia outlet mounted on 4 mild steel legs to give 1000 mm ground clearance. Mild steel bridge with stainless steel lid hinged one side of the bridge fixed on the other with various connections, centre mounted gate type stirrer 4 Kw 16 Rpm. Mild steel jacket tested 75 PSI.
Stainless Steel Water Jacketed Tank 1,600mm X 2,500mm Deep on the straight to 200mm Deep Cone to 100mm dia Bottom Center Outlet. Mounted on 4 legs to give 1,500mm ground clearance. Lid with 1/3 hinged section, 3 Off 75mm dia, 2 Off 50mm dia, 1 Off 25mm dia Inlets. Center mounted 5.5 kW V/Speed geared drive approx 20 to 70 rpm Anchor Stirrer in combination with off center Mounted 5.5 kW 1,440 rpm Tubular Vortex Stirrer. Tank made by Pierre Guernis.
Stainless Steel Water Jacketed with Stainless Steel Outer Cladding 2,000mm dia X 2,000mm Deep. Dish Top and Bottom with 50mm dia Bottom Outlet. Mounted on 3 legs to give 450mm ground clearance. Top with 500mm Manway, 75mm and 3 Off 25mm Inlets with Anchor Type Paddle Stirrer 1.5 kW 8 rpm.
Stainless Steel with S/S Half Coil. 2,000mm Dia X 2,000mm Deep with Convex Base to 100mm Bottom Outlet. Dish Top with 500mm Manway, 2 Off 110mm dia, 75mm, 2 Off 50mm Inlets. Side with mounting pads. 20 Turns Of 55mm dia half coil. With Gate Paddle Agitator.
13,500L S/S JKTD Contra Rotational mixing vessel 5.5 kW
Stainless Steel Jacketed with contra rotational Scraped surface mixers, chamber 2,900 mm dia x 2,000 mm deep with 800 deep cone to 50 mm dia outlet. Mounted on 4 stainless steel legs to give 200 mm ground clearance. Overall height to bridge 3,300 mm. Mild steel bridge, stainless steel lid with hinge one side with inspect hatch 250 mm dia, other side fixed with various connections, centrally mounted variable speed Out scraped surface anchor stirrer 5.5 kW 3.3 to 20 Rpm inner variable speed paddle stirrer with 5.5 kW 14 to 85 Rpm. With Stainless Stainless dimple type jacket tested 90 PSI made by Kells 304 grade stainless steel.