Stainless Steel U Section Conveyor 100mm X 110mm X 1200 Long With 90mm Dia Internal Continuous Auger Driven By 0.55Kw 0 To 174 Rpm Variable Speed Drive. With 90mm X 180mm Feed Inlet And 100mm Dia Outlet Hinged Lid With Cryogenic Lanc Feed. Overall Size 2500mm Long X 340mm Wide X 500mm Tall.
Stainless Steel Conveyor U Section 200mm Dia X 4100mm Long With 60mm Dia Centre Shaft With Bolt On Lid To Allow For The 25 Deg Incline Fitted With 2 Off Square Outlets 150mm X 150mm And 1 Off Square 150mm X 150mm Inlet With Drain To Be Fitted A The Lowest Point Fitted With 2 Off Suport Pads . Driven By Sew Geared Drive To Suit.
New U Trough S/S 316 Conveyor
300mm Dia X 4,500mm Long. Trough Fabricated in 3mm S/S Grade 316. Screw Flight from 3mm Thick Material stitch welded to 73 dia centre shaft. One Outlet Fitted at drive end. One hanger bearing fitted. Covers are bolted and sealed. Drive Motor to Ip55, 415/3/50. Final drive via Chain and Sprocket, Fully Guarded, Finish Outer Trough 'Bead Blast'. Supplied fully assembled. Starter not included.